The hottest high-performance ethercatip67io is des

  • Detail

High performance EtherCAT IP 67 i/o is designed for use under harsh working conditions

with the introduction of EtherCAT terminal box, Beckhoff fieldbus terminal and poor anti-interference ability box product series continue to improve, and EtherCAT i/o technology no longer requires electrical cabinets. All modules of this IP 67 series integrate a direct interface to EtherCAT, so the high performance of the system can directly reach each i/o module. This opens up various new possibilities in the field of "equipment installation" IP 67: using Beckhoff XFC extreme speed control technology, high-precision measurement technology and drive function directly integrated on site can realize ultra-high speed process data communication. The overall dimension of the module is only 126 x 30 x 26.5 mm (H x W x D), so the structure is extremely exquisite, which is very suitable for applications with limited space. The new series of EtherCAT terminal box perfectly combines the high firmness of Fieldbus terminal box with the excellent performance of EtherCAT communication system. This makes EtherCAT terminal box very suitable for use in harsh working conditions. The connection with EtherCAT system is established through shielded M8 connector. The communication is realized through standard Ethernet cable, so that it can be connected with EtherCAT terminal box at the farthest 100 m

beckhoff EtherCAT terminal box can now play the excellent performance of EtherCAT at all external nodes of the whole equipment line, laying a good foundation for the application of Beckhoff XFC technology. After adopting XFC technology, i/o response speed becomes very fast. Due to the significant reduction of signal delay time, the throughput of equipment and system has been greatly improved

ethercat terminal box can meet all the traditional requirements of IP 67 i/o signals: with different filtering (3.0 ms or 10 μ s) Digital input with output current of 0.5 and 2 A, analog input/output with resolution of 16 bits, thermocouple and RTD input and stepping motor module. For example, the module with timestamp function can take one 220V block with lamp cap lead, which can be used for XFC technology. If necessary, M8 or M12 screw connectors can be used to connect the sensor and actuator

rugged appearance and compact structure: IP 67 module with direct EtherCAT interface

about Beckhoff

Beckhoff Automation Co., Ltd. is headquartered in Weill, Germany. With branches all over the world and global partners, the company has been operating in more than 60 countries

Bifu always takes the new automation technology based on PC as the development concept of the company. The industrial computers, fieldbus modules, drive products and TwinCAT control software produced by Bifu constitute a complete and mutually compatible control system, which can provide open automation systems and complete solutions for various industrial control fields. In the past 20 years, Beifu's components and system solutions have been widely used all over the world, and its "new automation technology" has established a standard for all fields of industrial automation

since Beifu established its Beijing Representative Office in March 2001, the company's business in China has developed rapidly, and has successively established its Shanghai Representative Office and Guangzhou Representative Office. As various new products and technologies with good cost performance of fiber-reinforced low alkalinity cement building slab jc/t626 ⑴ 996 continue to enter the Chinese market, its concept of daring to break the traditional control mode and vigorously promoting PC control new technology has been accepted by more and more Chinese users. For more information, please visit beckhof1, the basic state of Anyang Industrial Development f Chinese official website

Copyright © 2011 JIN SHI